|
|
| Home » Products » Steel Pipes & Tubes » Grooved Fire Fighting Pipes |
 |
| Grooved Fire Fighting Pipes |
We also manufacture pipes with grooves directly
rolled into the pipe ends. This is achieved using a new
processing station which mainly consists of twoautomatic
groove rolling systems which clamp the pipe, turn it and
thereby produce the groove using hydraulically
controlled sets of rollers.
The economic advantage compared with weld-on grooved
sockets results from the saving in costs incurred for
preparing separately turned pipe ends and for welding
them to the pipe. This type of pipe is especially
suitable for the transport of water, air or solid matter
under the rugged conditions prevailing on construction
sites, which necessitate swift and easy connection of
pipes using commercially available couplings without any
special tools.
The groove is compatible with all commercially available
couplings, fittings and fasteners. These pipes are
preferred for use in the construction of Sprinkler
systems, in the construction of ducts for air as well as
for cooling or service water, in mining and civil
engineering, e.g. for dewatering systems, carbon and mud
pipelines etc. as well as in agricultural applications
for irrigation plants.
Grooved systems not only Surpass performance
expectations and deliver value, quality and
dependability but also eliminates costly fire watch and
hazardous flames and fumes during installation and
maintenance with the no-flame joining method.
Grooved Fire Fighting
Pipes |
Grooved Fire Fighting Pipes
Manufacturer |
Grooved Fire Fighting Pipes
Exporters |
Grooved Fire Fighting Pipes
Suppliers |
Grooved Fire Fighting Pipes
Distributors |
Exporters of Grooved Fire Fighting
Pipes |
Manufacturers of Grooved Fire
Fighting Pipes |
Suppliers of Grooved Fire Fighting
Pipes |
Distributors of Grooved Fire
Fighting Pipes |
Grooved Fire Fighting
Pipes India |
Major Application :
- Fire Protection Systems
- HVAC
- Plumbing
- Waste Water Treatment Plants
- Plant Piping
- Oil Fields
|
 |
 |
 |
| Lubricate and
push the 009v rigid coupling on a grooved pipe
end |
Join in the other pipe |
Tigten the two bolts |
|
|
|
|
|
|
Diameter |
Wall thickness |
Pos. of seal A |
Wideness of
Groove B |
Diameter of
Groove B |
Diameter of
Groove C |
Depth of
Groove D |
|
mm. |
min. |
max. |
+/-0.76 |
+/-0.76 |
Base |
Tolerance |
|
|
60.3 |
2.6 |
3.6 |
15.88 |
8.74 |
57.15 |
-0.38 |
1.60 |
|
76.1 |
2.6 |
3.6 |
15.88 |
8.74 |
72.26 |
-0.46 |
1.98 |
|
88.9 |
2.9 |
4.0 |
15.88 |
8.74 |
84.94 |
-0.46 |
1.98 |
|
114.3 |
2.9 |
4.0 |
15.88 |
8.74 |
110.08 |
-0.51 |
2.11 |
|
139.7 |
3.2 |
4.0 |
15.88 |
8.74 |
135.48 |
-0.51 |
2.11 |
|
168.3 |
3.2 |
4.5 |
15.88 |
8.74 |
163.96 |
-0.56 |
2.16 |
|
219.1 |
3.2 |
5.0 |
19.05 |
11.91 |
214.04 |
-0.64 |
2.34 |
|
 |
|
|
|
| |
|
